We are updating from Coldfusion11 to Coldfusion2018 and are trying to configure the PMT. We have installed the PMT on a separate server, but are unable to configure it to auto-discover our CF server nor can we manually add it. Both the CF server and the PMT server are Redhat Linux. We assumed that the datastore was created as part of the CF installation, but have also explicitly installed a datastore on the CF server. Neither seem to work. When we try to manually add the CF server within PMT, we get a 'Failed to Respond' error message. We're not sure on which server the datastore should be installed or if we are using the correct port. We've been using the port that was defined during installation of the PMT. Within the CF administrator, the monitoring settings indicate that we are not connected to a datastore nor is monitoring enabled. Are these settings controlled via the web server or the PMT server?
I apologize if this information is already available, but I've come up short in my research. Thanks in advance!